Liquid Boot® PLUS
High performance Vapor Intrusion Barrier Systems designed to meet your project requirements
LIQUID BOOT is a spray-applied, water-based membrane containing no volatile organic compounds (VOCs). With superior chemical resistance properties it seals all vapor intrusion pathways, preventing contaminated soil vapors from penetrating the slab. LIQUID BOOT spray applied vapor intrusion barrier systems can be used in underslab and below grade vertical wall applications to minimize gas and vapor intrusion into buildings.
Unlike many petroleum services companies, Gatlin Services also offers environmental services by licensed professionals such as site assessments, drilling, monitoring well installation, sampling, and ground water remediation systems installations and maintenance. All of these capabilities allow us to provide turnkey jobs for your environmental problems.
Contact Us To Learn More
Gatlin Services
- UNDERGROUND STORAGE TANK REMOVAL
- TANK CLOSURE AND DISPOSAL
- TANK CLEANING & VACUUM TRUCK SERVICES
- PETROLEUM CONTAMINATED WATER PROCESSING & DISPOSAL
- ON-SITE VACUUM EXTRACTION UNIT FOR MEME EVENTS
- VACUUM TRUCK SERVICES FOR COMMERCIAL DRAIN & SUMP CLEANING
- ENVIRONMENTAL CONSULTING SERVICES BY LICENSED PROFESSIONAL
- TURNKEY TANK REMOVAL, CLOSURE QUOTES
- REGULATORY GUIDANCE
Featured Products
LIQUID BOOT
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered gas vapor barrier system.
LIQUID BOOT 500
LIQUID BOOT 500 is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT 500 is economically formulated specifically for horizontal applications. LIQUID BOOT 500 spray application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered gas vapor barrier system.
LIQUID BOOT PLUS
The Liquid Boot Plus system is designed for the most challenging conditions. The system combines all of the benfits of Liquid Boot with the added protection of the VI-20 geomembrane.
BASEFABRIC
BASEFABRIC: fabric consists of polypropylene, non-woven geotextile that is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. BaseFabric provides a uniform substrate for spraying the Liquid Boot membrane.
LIQUID BOOT TROWEL GRADE
LIQUID BOOT TROWEL GRADE is a trowel-applied, water-based membrane containing no VoCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT TROWEL GRADE is installed in conjunction with the LIQUID BOOT vapor intrusion barrier to minimize vapor migration.
ULTRADRAIN
ULTRADRAIN: consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Ultradrain also has a protection sheet bonded to the backside of the cuspated core providing protection for soft membrane barrier systems.
ULTRASHIELD
ULTRASHIELD: fabric consists of polypropylene, non-woven geotextile that is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. UltraShield provides protection for the membrane from rebar and other construction processes.
VI-20 DETAILING FABRIC
VI-20 DETAILING FABRIC is a seven-layer co-extruded membrane made from polyethylene to provide strength as well as resistance to VOC vapor transmission. VI-20 Geomembrane is an underslab and vertical wall barrier that, when used in conjunction with LIQUID BOOT®, will inhibit volatile organic compound vapor migration through the concrete.
VI-20 GEOMEMBRANE
VI-20 is a 7-layer co-extruded EVOH geomembrane made using high quality virgin-grade polyethylene and barrier resins that provide unmatched impact trength as well as superior resistance to VOC vapor transmission. EVOH technology serves as a highly resilient underslab and vertical wall barrier designed to restrict methane, radon and other harmful chemicals. Applications for EVOH originatedin them of hydrocarbons, whose use was mandated by the US EPA and the CA Air Resources Board (CARB) to reduce VOC emissions.
GEOVENT
GEOVENT: consists of a three-dimensional vent core that is wrapped in a non-woven, needlepunched filter fabric.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.Accept Read More Privacy & Cookies Policy
